Description
FOCBOX SPECIFICATIONS
| Features & Benefits
Built into protective hard case Aluminium heatsink included 5V 1A Output for external devices Regenerative braking charges battery Sensored & Sensorless Motor Control Powerful start torque on sensorless motors Common Micro USB interface
|
Hardware Specifications
Voltage rating of components 8V-50V Compatible battery 3S to 12S Recommended 10S battery 300A Peak Current Limit 60A Continuous Current
|
| Dimensions
Main PCB: 60mm x 60mm Hard Case Footprint: 64mm x 64mm Hard Case Height: 22mm Motor Wires: 50mm Power Wire & XT 60 Plug: 40mm Mounting Hole pattern: 15mm X 30mm
|
Software Features
FOC Control for quiet operation Current, Speed, Duty-cycle Control Adjustable Motor & Battery Current Limits Low & High Voltage limits Regenerative Battery Current Control |
| Advanced Features
Over Voltage protection Current and voltage monitoring on all phases Field Oriented Control RPM-based phase advance (field weakening) Rapid duty cycle changes High RPM & RPM Limits (bi-directional) Soft backoff for over current & over temp amp-hour and watt-hour counting |
Firmware & GUI
ChibiOS/RT GUI Built with QT
Control Interface PPM, Analog, UART, USB, CAN-bus, I2C
|
| Warranty
30 Days for self-installed applications * * Manufacturing defects only, does not cover faults due to wrong settings applied by user, water damage etc
|
Please note: This latest batch of FOCBOXes have the Sensor Port mislabelled, please see here for the correct pin out diagram
The FOCBOX contains firmware created by Benjamin Vedder, you can find the VESC project source here. This software is redistributed under the GNU GPL licence, you can find the licence here
Reviews
There are no reviews yet.